Climate chamber for stability testing in accordance with ICH – WHO – EMA – ASEAN – GMP – GLP – GCCP.
Service
Worldwide at your disposal: Supply of spare parts, maintenance, repair, commissioning, IQ/OQ/PQ qualification, trainings and software instruction.
Climate chamber ICH for stability testing in accordance with ICH and GMP
Its excellent temperature and humidity homogeneity positions the climate chamber ICH in the international top league of stability test chambers. Thermal transfer to the interior – whether heat or cold – is guaranteed through a large-area air jacket on four sides. Thanks to its hermetically sealed interior, the climate chamber ICH does not consume any water once the setpoints have been reached, provided that the door is not opened. Two high-grade platinum temperature sensors with mutual monitoring guarantee interruption-free long-term operation even if one sensor should fail.
- Digitally controlled active humidification and dehumidification from 10 to 80 % rh
- Temperature range from – 10 °C to + 60 °C (models ICH), 0 °C to + 60 °C (modelsICHL)
- 1 model variant – TwinDISPLAY
- double doors as standard: Prevention of contamination and drops or prevention of rises in temperature with an optimal view of the chamber load through wide-area interior glass doors
ICH stability testing (Q1B, option 2) in the climate chamber ICHL
In the climate chamber ICHL, a lighting unit can be used for testing in accordance with the ICH guidelines Q1B, option 2 (photostability). Fluorescent lamps with cold white light (daylight: light color 865, 6,500 K) and UV radiation in the spectral range 320 – 400 nm serve as the light source. Daylight and UV light correspond to standard light D65.
A Memmert ICH climate chamber offers unique advantages
- intuitive and easy-to-use operating menu
- Temperature and humidity ramps programmable via AtmoCONTROL software
- Almost exclusive use of high-quality, corrosion-resistant and easily cleanable stainless steel for the working chamber and housing
- A wide range of options for programming and documentation using interfaces, integrated data logger and software AtmoCONTROL
- 3 years guarantee worldwide
Temperature-humidity working range ICH
Not all climate chambers are the same. The humidity content of the chamber load, the ambient conditions and the respective temperature-humidity working range are decisive factors in the selection of the right appliance. In the adjacent diagram, you can see the possible temperature/humidity combinations for our climate chamber ICH.
Within the respective temperature-humidity range, condensation-free permanent operation is possible. To which extent condensation may occur in the threshold range depends on the humidity content of the chamber load and the ambient conditions.
This seems not to be the appropriate device for your temperature-humidity-working range?<br />See the other Memmert climate chambers.
Standard units are safety-approved and bear the test marks
Models
Size All 110 (internal dimensions 108 litres, 560 x 480 x 400 mm) 110 (internal dimensions 108 litres, 560 x 480 x 400 mm) 260 (internal dimensions 256 litres, 640 x 800 x 500 mm) 260 (internal dimensions 256 litres, 640 x 800 x 500 mm) 750 (internal dimensions 749 litres, 1040 x 1200 x 600 mm) 750 (internal dimensions 749 litres, 1040 x 1200 x 600 mm)
